A useful curtain or upholstery note names the cloth, the room job and the decision still open. This page is a ledger for that note. It does not state stock, a mill slot or a certificate.
Ask a material question| Request | Include |
|---|---|
| Sample discussion | Reference, colour and use |
| Specification question | Composition, GSM, width and finish |
| Availability question | Material reference and quantity |
| Order context | Destination and requested timing |
Write the window job in plain room language before you attach a mood image. Say whether the cloth is a face fabric, a sheer or a lining, and whether the panels will be stacked, ripple-folded or left as a simple pair. Fullness changes how much cuttable width you need, so a nominal cloth width without the heading plan is an incomplete number. If a previous installation is the reference, name what must stay visually close: slub, sheen, colour depth or the way the hem weights the cloth.
GSM belongs with a unit and a tolerance, not as a lone target. A heavier drapery cloth can still be an open weave, and a lighter cloth can feel firm if the yarn is compact. A sheer near 90 g/m² and a face cloth near 280 g/m² can share a room and still need different headings. Ask for the construction in words a workroom can use: plain weave, twill, jacquard or a knit, plus warp and weft if the float might catch on a ring or a track. Finish should be named as a process you can recheck, such as a calender, a soil-resist step or a wash that changes handle. Do not collapse those into one comfort word. Usable width, in centimetres inside the selvedge, is still unknown until the memo states it.
Upholstery questions start at the contact surface. An arm that people lean on, a seat deck and a loose back cushion do not share one wear story. If abrasion resistance is the concern, ask for the method name, the end point and whether the specimen was the face cloth alone or a made-up composite. Pilling is a separate surface change. Seam slippage matters when the weave is loose and the cushion is tight. Usable width still matters, because railroaded cuts and up-the-roll cuts consume the cloth differently and can move a pattern repeat across a cushion border.
Shade and lot notes should travel with the sample, not in a later email that loses the reference. A lab dip is a colour trial. A production shade band is a range around an approved standard. They are not interchangeable labels. If two windows or two chairs must match, say so, and say whether the match is under daylight, warm lamps or both. Colorfastness to light is more often the window question. Colorfastness to rubbing can matter on a pale seat. Keep the test next to the property it actually measures.
Quantity and destination describe the conversation you want to have. They do not, by themselves, confirm that a length is available or that a date can be met. If you are comparing a stock colourway with a custom colour, keep those paths in separate sentences so a shade approval is not mistaken for a length approval. Roll inspection notes, if you already have them, can mention faults you care about, such as a barre that would show on a wide panel. Leave unknown fields blank rather than filling them with a guess.
Share the sample reference and the room context that should travel with it.